Product Overview
4-Pin Wireless Video Transmitter and Receiver for Vehicle Camera Systems
The HikWay 4-Pin Wireless Video Transmitter and Receiver is designed to transmit video signals from compatible vehicle cameras to a remote receiver without running a long video cable between the two units. It is suitable for vehicle monitoring projects where cable routing is difficult or a wireless video connection is preferred.
Supporting 1080P/720P video, a 2.4GHz operating frequency band and a wide DC 12–42V input range, this wireless video link is designed for demanding vehicle environments. Its compact housing and IP69-rated protection make it a candidate for compatible commercial vehicle and mobile surveillance applications.
Key Features
-
1080P/720P Video Support: Designed for compatible high-definition vehicle camera applications.
-
Long-Range Wireless Transmission: Specified transmission distance of over 1,500 meters in unobstructed conditions.
-
2.4GHz Wireless Band: Operates within the 2400–2483.5MHz frequency range.
-
Wide Voltage Input: DC 12–42V for supported vehicle power configurations.
-
IP69 Protection: Designed for demanding environmental conditions, subject to correct installation and sealing.
-
H.264 Compression: Uses H.264 video compression.
-
Low Startup Time: Approximately 2 seconds.
-
Transmitter and Receiver Kit: Includes one transmitter, one receiver and two antennas.
Potential Applications
This wireless video transmitter and receiver may be suitable for compatible camera installations in:
-
Commercial trucks and vans
-
Buses and coaches
-
Trailers and other mobile equipment
-
Vehicle-mounted monitoring systems
-
Specialized vehicles where conventional video cabling is inconvenient
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | WVTR-4PIN |
| Video resolution | 1080P at 25fps / 720P at 30fps |
| Transmission distance | Over 1,500m without obstacles, as specified |
| Operating frequency | 2400–2483.5MHz |
| Video compression | H.264 |
| Input voltage | DC 12–42V |
| Transmitting power | 20dBm with power control |
| Maximum specified delay | 120ms |
| Protection rating | IP69 |
| Operating temperature | -20°C to 80°C |
| Dimensions | 100 × 95 × 25mm |
| Package contents | 1 transmitter, 1 receiver, 2 antennas |
Compatibility Notes
Before ordering, please confirm the camera's video output format, resolution, connector pinout and power requirements, as well as the receiver's video output format and the monitor or recording device's input requirements.
The stated transmission distance applies to unobstructed conditions and should not be treated as a guaranteed range in every vehicle installation. Actual performance may vary with obstacles, antenna placement and radio interference.
Need Help With Your Vehicle Camera Project?
Contact HikWay with your camera model, video format, connector details and intended installation environment. Our team can help you check compatibility before ordering.
VIDEO:
DETAILS:
PACKING DETAILS:
1* wireless transmitter
1*wireless receiver
2* antenna
